Electra Elite Issue 6
Features and Specifications Manual E - 5
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-1-46 and 1-1-47 [Access Code (1- or 2-Digit)
Assignment] default Dial number 60 for Volume/LCD control.
Use Memory Block 4-92 (Receiving Volume Selection) to set either
DOWN (return receiver volume to a normal setting) or UP (keep the
setting increased for a call after hanging up that call).
General:
Multiline Terminal users can further increase station volume by
pressing Feature + 2 during internal calls.
LCD contrast, off-hook ringing volume, station ringing volume, and
speaker volume adjustments are saved in system memory.
To Next Page
Loading...