Electra Elite Issue 6
Features and Specifications Manual E - 9
General:
Each TLI(2)-U10 ETU supports two 4-wire E&M Tie Lines.
When a call from/to the remote end is made to a busy station in the
Electra Elite systems, the caller cannot set Callback Request, Step
Call, or Camp-On.
The incoming ringing pattern for Tie line calls can be changed in
System Programming, or voice announcement can be selected
system-wide (default: 2 seconds ON/4 seconds OFF).
Immediate start, wink start, delay start, or second dial tone (default)
loop supervision can be selected per trunk using System
Programming.
When voice announcement for incoming Tie calls is selected, the
outside party cannot switch the call to a ringing call.
The Recall key and Drop key are ignored when Tie lines are used.
RELATED FEATURES
LIST
Feature
Number
Feature Name
F-4 Flexible Numbering Plan
T-2 Tandem Switching of 4-Wir eE& MTi eLines
T-7 Trunk-to-Trunk Transfer
U-3 Uniform Numbering Network
To Next Page
Loading...