A - 12 All Call Page
Issue 6 Electra Elite
1. Lift the handset, and wait for internal dial tone or press the
hookswitch when the user is engaged in a call.
2. Dial All Call Page Access Code
EK
(
default
)
.
3. Page.
1. Lift the handset or press the hookswitch when the user is
engaged in a call.
2. Wait for dial tone.
3. Dial Meet-Me Access Code
EJ
(default).
4. Talk with All Call Page originator.
QUICK ACCESS
CODE REFERENCE
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 4-31 (Receiving Internal/All Call Page Selection)
to allow or deny station paging. This includes All Call Page, Internal
Zone Paging, and External Zone Paging. Internal Emergency All Call
Page is not included.
Use Memory Block 1-2-25 (Internal Paging Alert Tone Selection) to
allow (default: YS) or deny (NO) system-wide Paging alert tone
(Internal and/or External).
Restrictions:
A Multiline Terminal user engaged in a handsfree call cannot receive
All Call Page or Internal Zone Pages.
To originate a page on a Single Line Telephone:
To answer a page on a Single Line Telephone:
Default Access Code Name
Alphabetic
Designation
59 All Internal/External Zone Paging N/A
5
,
Internal/External Meet-Me N/A
To Next Page
Loading...