Electra Elite Issue 6
Features and Specifications Manual F - 5
Use Memory Block 2-06 (System Speed Dial Display Assignment) to
assign functions to CO/PBX line keys in a tenant specified as Tenant
Mode. Default is CO.
Use Memory Block 4-12 (Line Key Selection for Telephone Mode) to
assign functions to CO/PBX line keys in a tenant specified as
Telephone Mode. Default is CO.
Feature Access keys and One-Touch keys are similar in purpose and
ability. Unused Line keys can be assigned as Feature Access keys.
One-Touch key availability is controlled by the type of Multiline
Terminal.
General:
Line keys, not used for CO/PBX line access, may be assigned as
Feature Access keys in System Programming. The user can then
program the Feature Access keys for Speed Dial, DSS/BLF, and
selected features (e.g., Call Pickup, Paging, DND set, or DND
cancel).
Each Feature Access key can store up to 16 digits.
When programming Feature Access or One-Touch keys, press the
Answer key, then press: Recall, Feature, Conf, Redial, Speaker,
Answer, Transfer, or Hold to enter and store the applicable feature
keys.
RELATED FEATURES
LIST
Feature
Number
Feature Name
D-13 Direct Station Selection
F-3 Flexible Line Assignment
N-1 Nesting Dial
O-3 One-Touch Feature Access
S-10 Speed Dial - Station
A-12 Speed Dial - System
To Next Page
Loading...