F - 8 Flexible Line Assignment
Issue 6 Electra Elite
• Route Advance Blocks (01~16)
• Call Appearance keys (for Groups 00~47, Locations 01~24)
• Feature Access keys (01~10) Series S4500 or lower
• Feature Access keys (01~16) Series S5000 or higher
• MIC ON/OFF key
• Headset ON/OFF key
• Scroll Key for Caller ID Indication
• Call Forward - Busy/No Answer
• Call Forward - All Call
• Do Not Disturb/Break On/Off
•Log On/Off
• Background Music On/Off
•ICM key
• Secondary Incoming Extensions (01~120)
SIE extensions are used for incoming call pickup operation
only. Outgoing calls cannot be made using this feature.
The ETW-8-1/2(BK)/(SW) TEL, DTP-8D-1(BK)/(WH) TEL, DTU-8D-2
(BK)/(WH) TEL, and DTP/DTU-8-1(BK)/(WH) TEL have eight Flexible
Line keys.
The ETW-16DC-1/2(BK)/(SW) TEL, ETW-16DD-1/2(BK)/(SW) TEL,
DTP/DTU-16-1(BK)/(WH) TEL, DTP-16D-1(BK)/(WH) TEL, DTU-
16D-2(BK)/(WH) TEL, DTP/DTU-32-1(BK)/(WH) TEL, DTP-32D-
1(BK)/(WH) TEL, DTU-32D-2(BK)/(WH) TEL each have 16 Flexible
Line keys.
The ETW-24DS-1/2(BK)/(SW) TEL has 24 Flexible Line keys.
Only one MIC ON/OFF key and one Headset ON/OFF key can be
assigned for each Multiline Terminal. When a headset ON/OFF key is
used, an ADA(1)-W(BK)/(SW) Unit is required to support the headset.
ADA(1)-W(BK)/(SW) Unit is available for ETW type telephones only.
Feature Access keys are programmed by the user for DSS, Speed
Dial, or Feature Access Codes.
At system default, Flexible Line keys 01~08 are assigned as CO
01~08.
To Next Page
Loading...