H - 4 Handsfree Answerback
Issue 6 Electra Elite
SERVICE
CONDITIONS
Data Assignment:
Use Memory Blocks 2-05 (Line Key Selection) and 2-06 (Line Key
Selection for Tenant Mode) or 4-12 (Line Key Selection for Telephone
Mode) to enable and assign a CO/PBX line key as an MIC ON/OFF
key.
Restrictions:
When a station is signaled by a tone signal, the station user cannot
respond with Handsfree Answerback, unless the calling party
changes to voice call.
This feature works only for incoming internal voice calls.
General:
Multiline Terminal MIC LED must be on.
The calling station controls the voice announcement or ringing signal.
Multiline Terminal users can receive voice calls from Single Line
Telephone users.
Group Call Pickup and Call Forwarding do not operate for voice
announcement calls.
RELATED FEATURES
LIST
Feature
Number
Feature Name
I-4 Internal Voice/Tone Signaling
To Next Page
Loading...