I - 12 Internal Zone Paging (Meet-Me)
Issue 6 Electra Elite
1. Press
P
or lift the handset.
2. Dial Access Code
EJ
(default).
3. Use the handset to talk with party.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-2-00 (Internal Paging Timeout Selection) to
select timeout of 90 seconds (default), 120 seconds, or
∞
(no limit).
Use Memory Block 1-2-25 (Internal Paging Alert Tone Selection) to
specify whether (default: YS) or not (NO) a call alert tone is provided
with Internal Paging.
Use Memory Block 4-31 (Receiving Internal/All Call Page Selection)
to enable (default: YS) or disable (NO) receiving an Internal Zone or
All Zone Page per station.
Use Memory Block 4-93 (Internal Zone Paging Selection) to place
stations in Internal Page Zones.
Restrictions:
Terminal users cannot receive internal pages during a call.
All Internal Zone Paging or Internal Emergency All Call Paging
cannot be performed if any other internal page is in use.
Only stations in the Internal Zone being paged can answer.
Single Line Telephone users can originate but not receive a page and
Meet-Me answer.
General:
Simultaneous internal zone paging (A, B, and C) can be established.
A station can be assigned to one Internal Page Zone or No Zone.
Terminals assigned to No Zone receive All Internal Zone Pages.
Internal Emergency All Call or Internal Paging by Tenant Group
overrides No Page Receive.
Any station user can answer an All Internal Zone Page, Internal
Emergency All Call Page, or All Internal/External Zone Page.
All Internal/External Zone Paging uses Internal Zone Paging timeout.
To answer a page (Meet-Me):
To Next Page
Loading...