Electra Elite Issue 6
Features and Specifications Manual N - 11
Use Memory Block 1-8-07 [Class of service (Attendant) Feature
Selection 1] Page 1 LK1 and LK2 to allow (default: LED On) or deny
(LED Off) Night Mode Switching system-wide and per tenant.
Use Memory Block 1-1-27 (Automatic Day/Night Mode Switching
Time Assignment) to assign the pattern 1 and pattern 2 start time for
automatically switching between Day and Night Mode.
Use Memory Block 1-1-32 (Automatic Day/Night Mode by Day of
Week Selection) to select the pattern 1 or pattern 2 Day/Night Mode
start time for each day of the week.
General:
The following features are affected when switching to the Night
Mode:
• Flexible Ringing Assignment
• ANA Assignment
• Code Restriction Class Assignment
• Automated Attendant
• Night Chime
• Night Call Pickup
Feature Access keys or One-Touch keys can be assigned to set/
cancel Night Transfer (system-wide or per tenant).
RELATED FEATURES
LIST
Feature
Number
Feature Name
C-17 Class of Service
To Next Page
Loading...