P - 18 Privacy Release
Issue 6 Electra Elite
1. Press
T
.
2. Press
Q
.
3. Press the One-Touch Key.
4. Dial
B
.
5. Dial
AK
.
6. Press
T
.
Press the Privacy Release key.
1. Lift the handset or press
P
.
2. Press the CO/PBX Line key or CAP key that released privacy.
SERVICE CONDITIONS Data Assignment:
Use Memory Block 2-05 (Line Key Selection) to assign Tenant-Wide
or Telephone (default) Mode for each Tenant.
Use Memory Block 2-06 (Line Key Selection for Tenant Mode) to
assign CO/PBX trunks to the applicable Tenant.
Use Memory Block 4-12 (Line Key Selection for Telephone Mode) to
assign Feature Access Key (Page 1 LK6).
Restrictions:
Privacy Release is only available on an Outside line.
Only two stations can be added per CO/PBX call after Privacy
Release. After two parties have joined the conversation, the Conf
key LED at all stations that did not enter is turned off. A third station
that tries to enter receives a busy signal.
To program a One-Touch Key for Privacy Release from a
Multiline Terminal:
To activate Privacy Release from a Multiline Terminal with a CO/
PBX call in progress:
To Enter a Conversation using the Privacy Release from a
Multiline Terminal:
To Next Page
Loading...