Q - 2 Quick Transfer to Voice Mail
Issue 6 Electra Elite
1. Make the intercom call.
2. Dial the Quick Transfer Access Code (default:
G
).
3. Leave a voice mail message.
4. Hang up.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-8-26 (Voice Mail Quick Transfer Master Hunt
Number) to assign a Voice Mail Master Hunt Number.
Restrictions:
The Quick Transfer to Voice Mail is not allowed when caller is:
• Listening to the busy tone (BT)
• Talking on an internal line
• Talking on an outside line
• Making a conference call
• Setting Automatic Callback
General:
The Quick Transfer to Voice Mail feature is allowed when:
• Listening to the ring back tone (RBT)
• Listening to the call waiting tone (CWT)
• In Handsfree Answerback Mode
• In Voice Over Mode
This feature is allowed from a Single Line Telephone until the PBR
times out (default: 10 sec).
When Quick Transfer to Voice Mail is accessed, the Voice Over
feature is canceled.
While on an intercom (ICM) call, dial the Quick Transfer Access Code
(default: 7) to automatically transfer to that station Voice Mail box.
To quickly transfer a call to voice mail during an intercom call:
To Next Page
Loading...