R - 20 Route Advance Block
Issue 6 Electra Elite
Use Memory Blocks 1-1-46 and 1-1-47 [Access Code (1- or 2-Digit)
Assignment] Function Nos. 201~216 to define Route Advance Block
Access Codes.
Up to four Trunk groups can be programmed in one Route Advance
Block priority table.
Trunk groups can be repeated in multiple priority tables.
Restrictions:
The system must be assigned as MF registration.
General:
Outgoing Restriction and Code Restriction rules apply to stations
dialing out using Route Advance Blocks.
The line key assigned for a Route Advance Block is off when all
trunks and Trunk groups assigned to the Route Advance Block are
busy.
Stations are allowed to set Trunk Queuing to a Route Advance Block.
To Next Page
Loading...