S - 4 Scrolling Directories
Issue 6 Electra Elite
2. Press the
V
(UP or DOWN Softkey) to view the names/
numbers listed in the directory.
- OR -
Press a dial pad key (to select the first letter of the name or
number of the desired speed dial buffer) and dial
J
.
3. To dial the number press
P
or lift the handset.
4. Enter the Account Code.
SERVICE CONDITIONS Data Assignment:
Use Memory Block 1-1-18 (System Speed Dial Restriction by
Tenant) to specify whether or not System Speed dial is restricted for
tenants. (Default: 00, unrestricted).
Use Memory Block 1-1-33 (Speed Dial Number/Name Display
Selection) to specify whether the dialed number (default: DIAL) or
NAME is displayed first on the LCD when an outgoing call is made
using speed dial.
Use Memory Block 1-1-35 (Speed Dial Buffer Allocation) to select
either the 100-memory (default) or 1000-memory speed dial buffer
allocation.
Use Memory Block 2-07 (System Speed Dial Display Assignment) to
specify whether (LED On) or not (LED Off) confirmation of Speed
Dial numbers and messages stored in Speed Dial memory is allowed
(100-memory default: All Page 1 LEDs On).
Restrictions:
Scrolling Directories can be used only while the station is idle.
When the System Speed Dial Display Assignment is used to restrict
Tenants from viewing the numbers stored in System Speed Dial
buffers, the scrolling follows these conditions:
• When both Name and Number are stored, the user can scroll
System Speed Dial buffers.
• When only the Number is stored, the user cannot scroll System
Speed Dial buffers.
When System or Station Speed Dial data is stored or changed by PC
Programming, the changes are not displayed by the scrolling feature
until the PC Programming connection is released.
To Next Page
Loading...