A - 30 Attendant Add-On Console
Issue 6 Electra Elite
1. Lift the handset, and wait for internal dial tone.
2. Press the DSS/BLF key for the desired station. Hear ringback
tone or voice announce the station.
3. Called party answers.
1. Press the Message Wait or Station Lockout key.
2. Press the DSS/BLF key for the desired station.
1. Go off-hook with the handset or press a CO line key on the
Attendant Add-On Console.
2. Dial the desired number.
Press the incoming CO line key or flashing
O
if ringing is assigned.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-8-07 [Class of Service (Attendant) Feature
Selection 1] Page 1 LK8 to Allow (default: LED On) or Deny (LED Off)
attendant features.
use Memory Block 1-6-01 (Attendant Add-On Console to Telephone
Port Assignment) to assign Attendant Add-on Console to a telephone
port number (default: port 01 or 02).
Use Memory Block 1-6-03 (DSS Call Voice/Tone Signal Selection) to
specify whether VOICE (default) or TONE signaling is used first
when an Attendant makes a call using the Attendant Add-On
Console.
To call a station:
To set/cancel Message Waiting or Station Outgoing Lockout
(Outgoing Restrict) to station:
To make an outgoing call using the Attendant Add-On Console
from the Attendant Position:
To answer an incoming call using the Attendant Add-On Console
from the Attendant Position:
To Next Page
Loading...