S - 16 Single Line Telephone Access
Issue 6 Electra Elite
The system must be installed as Multifunction registration for Single
Line Telephones to have dial access to outside lines.
Default Access Code 6# can be used to send a hookflash from a
Single Line Telephone to an outside line.
After the PBR is released, DTMF tones from a Single Line Telephone
are not detected by the system but are sent directly to the CO/PBX
line.
When Data Line Security is assigned for a Single Line Telephone,
override tones are denied to this station.
When a Single Line Telephone is called, PBR is not connected to
that Single Line Telephone. Therefore, no features can be set.
RELATED FEATURES
LIST
Feature
Number
Feature Name
A-7 Ancillary Device Connection
C-23 Cordless Telephone Connection
To Next Page
Loading...