S - 18 SLT Adapter
Issue 6 Electra Elite
1. Press the hookswitch momentarily, and wait for second dial tone.
2. Dial the station number where call is to be transferred.
3. Hang up.
1. Lift the handset, and wait for internal dial tone.
2. Dial the applicable Feature Access Code.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 7-2 (Telephone Type Assignment) to specify the
station as an SLT Adapter.
Restrictions:
Message Waiting LED is not supported.
General:
A maximum of 8 SLT(1)-U10 ADPs can be used in the Electra Elite
48/192 system.
Dial Pulse and Dual-Tone Multifrequency Single Line Telephones are
supported.
SLT(1)-U10 ADPs do not support voice mail.
To transfer an outside call or internal call with a call in progress:
To access the feature:
To Next Page
Loading...