S - 74 System Data Up/Down Load
Issue 6 Electra Elite
OPERATING
PROCEDURE
1. Access the MIFM-U10 ETU via a direct connection from a
compatible PC, or use an MPN Class 5 compatible modem from
a remote location through an outside line.
2. Select menu for Up/Down Load (communication menu).
3. Select the item (e.g., Speed Dial) to be transferred.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 7-1 (Card Interface Slot Assignment) to specify
the MIFM-U10 ETU.
General:
This feature allows System Data to be programmed from a PC
connected to the system.
Data that can be transferred includes:
1. Complete System Data
2. Partial System Data
•All System Data Blocks
•Tenant Blocks (All/Tenant/Individual Tenant)
•Trunk Blocks (All Trunk/Individual Trunk)
•Terminal Blocks (All Terminal/Individual Terminal)
•Trunk Route Blocks
3. System Speed Dial
4. Station Speed Dial
•All Station Speed Dial
•Block Station Speed Dial
•Individual Station Speed Dial
•One-Touch DSS Speed Dial
To up/down load system data:
To Next Page
Loading...