T - 12 Trunk Queuing
Issue 6 Electra Elite
1. Dial the Access Code for outside line.
2. Wait for busy tone.
3. Dial the Trunk Queuing Access Code (default:
GH
).
4. Restore the handset.
1. Receive internal ringing tone.
2. Lift the handset or press
P
.
3. Wait for the outside dial tone.
4. Dial the desired number.
1. Lift the handset or press
P
.
2. Wait for internal dial tone.
3. Dial the Trunk Queuing Cancel Access Code (default:
GI
).
4. Restore the handset.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 1 LK 2 to Allow (default: LED On) or Deny (LED
Off) this feature for each Class of Service.
Use Memory Block 1-1-37 (Trunk Queuing Timeout Selection) to
specify the time (default: 10 sec.) a station with Trunk Queue set
rings before it is automatically canceled.
Restrictions:
Trunk Queuing cannot be set on an outgoing restricted line. When
tried, reorder tone is provided.
Using a Single Line Telephone when all outside lines are busy:
Using a Multiline Terminal or a Single Line Telephone when an
outside line becomes available:
To cancel this feature using a Multiline Terminal or a Single Line
Telephone:
To Next Page
Loading...