A - 42 Attendant Station Outgoing Lockout
Issue 6 Electra Elite
SERVICE
CONDITIONS
Data Assignment:
At default, when a station with Attendant Station Outgoing Lockout is
set, the station is outgoing restricted. Use Memory Block 1-1-70
(Code Restriction Class Assignment when Lockout is Set) to change
system-wide to a different Code Restriction Class.
Use Memory Block 1-6-05 (Attendant Add-On Console Key
Selection) to assign functions to Attendant Add-On Console keys.
When multiple Attendant Add-On Consoles are installed, the
Attendant Station Outgoing Lockout is displayed only on the
Attendant Add-On Console where the Lockout was set.
Restrictions:
An Attendant Add-On Console, with an Attendant Station Outgoing
Lockout key assigned on it, cannot be used to set the Message
Waiting feature from an Attendant.
General:
All Attendant Add-On Consoles can be used to set Attendant Station
Outgoing Lockout.
Attendant Station Outgoing Lockout is retained by the memory
backup battery.
No indication is provided at a terminal when Attendant Station
Outgoing Lockout is set.
To confirm that Attendant Station Outgoing Lockout is set at an
Attendant Add-On Console, ensure that the green LED associated
with the station is On. Lockout remains set until canceled at the
Attendant Add-On Console where it was set.
The station with Attendant Station Outgoing Lockout set cannot
manually cancel the lockout.
RELATED FEATURES
LIST
Feature
Number
Feature Name
M-2 Message Waiting
S-16 Station Outgoing Lockout
To Next Page
Loading...