V - 14 Voice Over Split
Issue 6 Electra Elite
1. Receive Voice Over.
2. Press
U
to answer the calling party. The other party is
automatically placed on hold (
O
flashes green).
3. Press
O
to switch over to talk to the other party.
4. Talk to the called party.
Repeatedly pressing
O
alternates the talk path between both
calls.
1. Receive Voice Over.
2. Press
T
and dial
FE
(or a Feature Access key/One-
Touch key programmed with the Access Code) to switch over to
talk with the calling station user if needed.
3. The called station user can then press
T
and dial
FE
to
switch back to the other party.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-2-24 (Intercom Feature Access Code
Assignment) to assign the Intercom Feature Access code (default: 6)
for Voice Over Originate.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 1 LK8 to Allow (default: LED On) or Deny (LED Off)
Voice Override/Tone Override Originate for each Class of Service.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 3 LK3 to Allow (default: LED On) or Deny (LED Off)
Voice/Tone Override Receive for each Class of Service.
Even when Data Line Security is assigned to a station, Voice Over
(Originate/Receive) can be activated. Voice Over blocks the override
tone from the handset.
To answer using a Multiline Terminal (Broker's call):
To answer using a Multiline Terminal (Whisper Page):
To Next Page
Loading...