W - 2 Wireless
Issue 6 Electra Elite
Automatic Release-Out of Zone Calls
General Description
When a D
term
PS II caller either crosses the service area boundary or
enters a zone where all channels are busy and communication is
impossible, the call is disconnected automatically, and the other party
receives reorder tone or Out of Area display.
OPERATING
PROCEDURES
Call Forwarding - Not Available
General Description
When a D
term
PS II is powered off or Out of Zone, a call directed to it is
forwarded to a VMS, and a message can be recorded to the VMS and
checked from the D
term
PS II. The VMS can page the D
term
PS II
automatically after the Voice Mail message is recorded.
OPERATING
PROCEDURES
Call Forward - All Call
Call Forward - Busy/No Answer
Call Forward – Off - Premise
Call Forward - Split
Calling Name Display- D
term
PS II
General Description
When an incoming call is ringing, or a hold call terminates on the D
term
PS
II, the calling party name is displayed on the LCD.
Operation is automatic.
Refer to Electra Elite 48/192 Features and Specifications Manual
for the following: