A - 44 Attendant Transfer
Issue 6 Electra Elite
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-1-11 (System Transfer/Camp-On Selection) to
allow (default: YS) or deny ring transfer or station camp-on.
Use Memory Block 1-1-13 (Co Transfer Ring Pattern Selection) to
select CO Transfer Ring Pattern (default: C).
Use Memory Block 1-1-14 (Co Transfer Ring Tone Selection) to
select CO Transfer Ring Tone (default: A).
Use Memory Block 1-1-64 (Attendant Add-On Console Transfer/
Camp-On Recall Time Selection) to set The Attendant Transfer/
Camp-On recall time-out (default: 1 minute).
General:
When a Transfer/Camp-On is denied, the call remains on hold at the
Attendant Position Multiline Terminal.
The outside line key LED flashes green on the station receiving the
Transfer/Camp-On, when the line appears on that station. The Large
LED also flashes green and the LED or the ANS key flashes red.
An Attendant trying to Transfer/Camp-On a call to a station may be
denied, when the Multiline Terminal is busy and receiving Tone
Override.
RELATED FEATURES
LIST
Feature
Number
Feature Name
A-11 Attendant Add-On Console
A-12 Attendant Camp-On
A-24 Automatic Release
To Next Page
Loading...