NEC Electra Elite 48/192 - Page 67

A - 46 Automated Attendant
Issue 6 Electra Elite
6. Enter Mode:
A
Day Mode
B
Night Mode
C
Weekend Mode
7. Record Message.
8. Go on-hook.
1. Press
T
.
2. Press
HA
.
3. Dial the incoming trunk number (
KK
~
FD
).
KK
indicates All CO/PBX lines.
Note: Dialing 00 sets or cancels the Automated Attendant mode for all trunks when
the trunks are idle.
Note: A trunk that is busy when 00 is dialed is not set. To set the Automated
Attendant to a busy trunk, dial the individual trunk number.
4. Press
T
.
1. Press
T
.
2. Dial
HB
.
3. Dial the incoming trunk number (
KK
~
FD
).
KK
indicates All CO/PBX lines.
Note: Dialing 00 sets or cancels the Automated Attendant mode for all trunks when
the trunks are idle. A trunk that is busy when 00 is dialed is not set. To set the
Automated Attendant to a busy trunk, dial the individual trunk number.
4. Press
T
.
To set the Automated Attendant Mode from the Attendant
Position:
To cancel the Automated Attendant Mode from the Attendant
Position: