Item
No.
Item Input Data Description Default Related
Program
21 Virtual Extension
Access Mode
(when idle Virtual
Extension key
pressed)
0 = DSS
1 = Outgoing (OTG)
2 = Ignore
Determine whether a Virtual Exten-
sion (VE) should function as a DSS
key or a Virtual Extension. When
DSS (0) is selected, the key func-
tions as a DSS key to the extension
and for incoming calls to that exten-
sion. When Outgoing (1) is selected,
the key functions as a virtual exten-
sion and can be used for incoming
and outgoing calls. When Ignore (2)
is selected, the key functions can re-
ceive incoming calls only.
2
22 Multiple Incom-
ing From Inter-
com and Trunk
0 = Disable
1 = Enable
If enabled, this affects how a Hotline
key lights, based on the setting in
Program 22-01-01. If 22-01-01 is set
to 1 for trunk priority, the Hotline key
lights solid when a trunk call rings
in. If 22-01-01 is set to 0 for inter-
com priority, the Hotline key does
not light for incoming trunk calls, but
lights solid for intercom calls. If
15-02-22 is disabled, Hotline keys
light solid for any incoming calls re-
gardless of the setting in Program
22-01-01.
1 22-01-01
23 Speed Dial Pre-
view Mode
0 = Preview
1 = Outgoing Immedi-
ately
This option defines how a speed dial
key functions when pressed. If set to
Preview (0), the speed dial number
can be previewed before dialing. If
set to Outgoing Immediate (1), the
number is dialed immediately.
0
27 Handset Volume 0 = Back to Default
(Back)
1 = Stay at previous
level (Stay)
Determine how an extension hand-
set volume is set after it is adjusted
during a call.
When 1 is assigned in this pro-
gram and a user sets the volume
to maximum, the volume is reset
to a level to meet FCC standards
when the user hangs up.
1
28 Message Waiting
Lamp Color
0 = Green
1 = Red
Determine whether an extension
Message Waiting Lamp lights Green
(0) or Red (1) when a message is
received.
1
29 PB Back Tone
Level
1 ~ 63 (- 15.5 dB ~
+ 15.5 dB)
This program allows adjustment of
the PB Back Tone Level when you
are calling an ISDN Line.
32 (0 dB)
30 Toll Restriction
Class
0 = Virtual Extension
(Follows virtual exten-
sion Toll Class in PRG
21-04.)
1 = Real Extension
(Follows physical sta-
tions Toll Class in PRG
21-04.)
Select the Toll Restriction Class to
use when placing a call from a virtu-
al extension.
1 15-02-21
34 Call Register
Mode
0 = Trunk Mode
1 = Extension/Trunk
Mode
The Caller ID Scroll stores Trunk
calls only (0), or both Internal and
Trunk calls (1).
1
35 Message Waiting
Lamp Cycle for
Calling Exten-
sion
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
Select the cycle method that the
Large LED flashes when the exten-
sion has set Message Waiting.
3
SL1100 ISSUE 6.0
2-130 Program 15 : Extension, Basic Setup
Program
15
To Next Page
Loading...
