Virtual Private Networking Using IPSec and L2TP Connections
227
NETGEAR ProSAFE VPN Firewall FVS318G v2
8. Configure the global parameters:
a. In the left column of the
Configuration Panel screen, click Global Parameters.
b. Specify the default lifetimes in seconds:
• Authentication (IKE), Default. The defa
ult lifetime value is 3600 seconds.
Change this setting to 28800 seconds to match the configuration of the VPN
firewall.
Local and Remote ID
Local ID As the type of ID, select DNS from the list because you specified FQDN in
the VPN firewall configuration.
As the value of the ID, enter remote.com as the local ID for the VPN client.
Note: The remote ID on the VPN firewall is the local ID on the VPN client. It
might be less confusing to configure an FQDN such as client.com as the
remote ID on the VPN firewall and then enter client.com as the local ID on
the VPN client.
Remote ID As the type of ID, select DNS from the list because you specified an FQDN in
the VPN firewall configuration.
As the value of the ID, enter local.com as the remote ID for the VPN firewall.
Note: The local ID on the VPN firewall is the remote ID on the VPN client. It
might be less confusing to configure an FQDN such as router.com as the local
ID on the VPN firewall and then enter router.com as the remote ID on the
VPN client.
Table 45. VPN client advanced authentication settings (continued)
Setting Description
To Next Page
Loading...
