Newtec Proprietary
Confidentiality: Unrestricted
R3.2_v1.0
126/387
General Device Settings and Actions
MDM9000 Satellite Modem
14.12 Alarm Handling
Alarm handling allows you to configure and manage the behavior of the different alarms in the
device.
Meaning that it is possible to
• Mask (hide) alarms.
• Assign alarms to a general interface or general device alarm.
Navigate to the following location to perform alarm handling.
MDM9000 >> Device Setup >> Alarm Handling
List of Alarms
For a comprehensive list of alarms, refer to Appendix-AlarmListonpage312
This function is available via the GUI, CLI and SNMP but not through the front panel:
To Next Page
Loading...
