EasyManua.ls Logo

Newtec MDM9000 - Alarms: BUC Power Alarms

Default Icon
400 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Newtec Proprietary
Confidentiality: Unrestricted
R3.2_v1.0
319/387
Appendix - Alarm List
MDM9000 Satellite Modem
17.7 Alarms: BUC Power Alarms
Alarms Description
BUC Power Minimal Current This alarm is raised when measured current for block up
converter power is below specified minimal value.
BUC Power Overload This alarm is raised when an overload is detected.
BUC Power Supply Failure This alarm is raised when 24 V/48 V supply is not operational
BUC Power Hardware
Failure
This alarm is raised when communication with block up
converter power unit is lost.
BUC Power To Much
Capacitance
This alarm is raised when there is too much output
capacitance connected.
BUC Power Short Circuit This alarm is raised when short circuit is detected.

Table of Contents

Related product manuals