Newtec Proprietary
Confidentiality: Unrestricted
R3.2_v1.0
192/387
Feature Descriptions
MDM9000 Satellite Modem
16.6.11 Spectral Inversion
MDM9000 >> Demodulator >> Spectral Inversion
Define if spectral inversion is detected automatically or set manually.
When spectral inversion is known, it is advised to set it manually as (re)lock time will decrease.
16.6.12 Backup Carrier
These settings are implemented to migrate a system setup from frequency 1 and symbol rate 1
(current) to a new frequency 2 and symbol rate 2 (new).
Configure these settings on the demodulator/modem of the remote sites when the modulator/modem
on the hub site has to change to a new carrier.
When this new carrier becomes active, the complete network is switched to this backup carrier
configuration.
To Next Page
Loading...
