Newtec MDM9000 - Demodulator

Newtec Proprietary
Confidentiality: Unrestricted
R3.2_v1.0
184/387
Feature Descriptions
MDM9000 Satellite Modem
16.6 Demodulator
The demodulator functional block is used to perform the demodulation of the incoming RF signal
(L-band or IF-band).
• DVB-S2, DVB-S2X and S2 Extensions
Please refer to the section Optionsonpage11.
Also refer to the section DeviceIdentificationonpage117 to get an overview of the options that are
installed on the device.
MDM9000 >> Demodulator