Newtec MDM9000 - Standby Redundancy State

Newtec Proprietary
Confidentiality: Unrestricted
R3.2_v1.0
168/387
Feature Descriptions
MDM9000 Satellite Modem
16.1.13 Standby Redundancy State
USS has no control over the connectors on the Modem
(Transmit state, interface state).
The standby redundancy state allows you to overrule the initial device redundancy state.
With this parameter it is possible to reduce the switching delay.
For more information on the initial device redundancy state and where to configure it please refer to
section: DeviceRedundancyonpage224.
The following figures show the principle.