EasyManua.ls Logo

Newtec MDM9000 - DVB-S2 X Standard

Default Icon
400 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Newtec Proprietary
Confidentiality: Unrestricted
R3.2_v1.0
322/387
Appendix - Overview of the Used Technologies
MDM9000 Satellite Modem
18.1.2 DVB-S2X Standard
This is the new enhanced DVB specification. The new standard allows for using the lower roll offs
(5%, 10% 15%).
Furthermore the DVB-S2X standard introduces a finer MODCOD granularity up to 113 MODCODs
and FEC codes up to 256APSK 11/15 in order to improve the performance of the DVB-S2 standard.
The new standard also includes three frame sizes (normal, short and medium) and it adds additional
standard scrambling sequences.
This standard also optimizes for linear and non-linear satellite links.
Two sets of MODCODs are available:
One set of MODCODs is optimized for multi-carrier operation of the transponder (linear channel
operation). In multi-carrier operation, the transponder can not be saturated and a given back-off
is needed to avoid intermodulation between the individual carriers in the transponder.
The second set of MODCODs is optimized for single carrier operation which allows to saturated
the transponder (non-linear channel).
Note that DVB-S2X receivers are also able to receive DVB-S2.
The following figure shows the efficiency fo the DVB-S2X standard compared to the DVB-S2
standard.

Table of Contents

Related product manuals