Newtec Proprietary
Confidentiality: Unrestricted
R3.2_v1.0
230/387
Feature Descriptions
MDM9000 Satellite Modem
16.11.1 General Encapsulation Settings
Navigate to the following location to configure the General Encapsulation settings. With general
settings we mean that these settings apply to both encapsulation protocol types (TS and BBF).
MDM9000 Satellite Modem >> Encapsulation
Enable this functional block to perform GSE or XPE encapsulation on the incoming IP data.
Select the appropriate forwarding mode: Layer 2 or Layer 3.
To Next Page
