EasyManua.ls Logo

Newtec MDM9000 - Page 243

Default Icon
400 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Newtec Proprietary
Confidentiality: Unrestricted
R3.2_v1.0
231/387
Feature Descriptions
MDM9000 Satellite Modem
The MDM9000 supports two forwarding modes:
1. Layer 2 Forwarding Mode
As Layer 2 Ethernet bridge, the MDM9000 transparently forwards any Layer 3 protocol, MPLS or
VLAN tagged traffic. Consequently it can be considered to act as an Ethernet cable over satellite.
However, operating as Layer 2 Ethernet bridge creates extra overhead. Connected network
segments act as one broadcast domain, which can generate some traffic overhead on the satellite
link as well (for example ARP requests being sent over the satellite link).
Also note that the MDM9000 operates in promiscuous mode, meaning that it will forward any
incoming packet over the satellite link (for example ARP requests from host A to B while A and B are
on the same LAN segment).
But classification rules can be defined to limit this (excessive) traffic overhead.

Table of Contents

Related product manuals