Newtec MDM9000 - Enable;Disable Demodulator; Demodulation Mode

Newtec Proprietary
Confidentiality: Unrestricted
R3.2_v1.0
185/387
Feature Descriptions
MDM9000 Satellite Modem
The main parameters are:
• Enable
• Mode
• Input Frequency
• Symbol Rate
• Acquisition Range
• Roll-off
• Input Selection
• Physical Layer Scrambler Signature
• LNB Power Supply
• Transponder Operational Mode
• Spectral Inversion
• Monitoring parameters
• MODCOD Statistics
16.6.1 Enable/Disable Demodulator
MDM9000 >> Demodulator >> Enable
Each demodulator can be enabled or disabled by setting the Enable parameter either "off" or "on" for
respectively activating or de-activating the specific demodulator.
16.6.2 Demodulation Mode
MDM9000 >> Demodulator >> Mode
Set the demodulation mode:
• DVB-S2
• DVB-S2X
• S2 Extensions
For more info on DVB-S2, DVB-S2X and S2 extensions please refer to
Appendix-OverviewoftheUsedTechnologiesonpage320