EasyManua.ls Logo

Newtec MDM9000 - PRBS Generator

Default Icon
400 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Newtec Proprietary
Confidentiality: Unrestricted
R3.2_v1.0
181/387
Feature Descriptions
MDM9000 Satellite Modem
16.4 PRBS Generator
The PRBS (Pseudo Random Bit Sequence) generator is used to perform basic tests on the device
or to get an indication on the satellite link quality.
Use the following procedure to activate the PRBS Generator.
MDM9000 >> Test >> PRBS
Enable
Bit Rate
Multi-stream mode: Choose between Multi stream and single stream PRBS generation
Streams
Per stream you can define the following:
The MODCOD
The frame type (normal or short frames)
The use of pilots or not
All MODCOD, frame type and pilot settings defined in the interface part are overruled
when PRBS is enabled.
No data will be decapsulated in the receiving modem. Use the DVB-S2 demod
statistics to observe the correct reception of the carrier.

Table of Contents

Related product manuals