Newtec MDM9000 - Configuration and Monitoring Parameters

Newtec Proprietary
Confidentiality: Unrestricted
R3.2_v1.0
279/387
Feature Descriptions
MDM9000 Satellite Modem
16.16.2 Configuration and Monitoring Parameters
The configuration parameters, to enable bandwidth cancellation, are located in the demodulator
block of the MDM9000 modem.
Make sure the input frequency of the demodulator is configured on the receiving frequency.
Enable bandwidth cancellation to start canceling the local carrier and extracting the remote carrier.
Next to enabling the bandwidth cancellation function, set the parameters so that the local carrier is
canceled out as good as possible.
The better the local carrier is canceled the higher the bandwidth gain and power reduction.
Navigate to:
MDM9000 >> Demodulator >> Bandwidth Cancellation