Newtec Proprietary
Confidentiality: Unrestricted
R3.2_v1.0
293/387
Feature Descriptions
MDM9000 Satellite Modem
Please check the following GUI screenshots:
The following steps are performed in the decapsulator:
To decapsulate the traffic, do the following:
1. Create a decapsulator with ISI 1.
2. Link the incoming channel to the decapsulator (ISI1).
.
The Access VLAN is only needed on the hub site. When entering a value here, a
VLAN tag is added to the IP header.
3. The data traffic is available on the data Ethernet interfaces.
To Next Page
Loading...
