Newtec MDM9000 - Page 95

Newtec Proprietary
Confidentiality: Unrestricted
R3.2_v1.0
83/387
How to Manage the Device
MDM9000 Satellite Modem
Craft Interface
To access the CLI via the craft interface do the following:
» Configure the line settings of the serial port as follows:
• Speed 115200 baud
• Eight data bits
• No parity bit
• One stop bit
» Make a connection between the managing device and the MDM9000 Satellite Modem.
For more information please refer to section: CraftInterfaceonpage27 .