7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
File system management
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command disables the drive. This command is available for use only with removable storage drives.
The removable storage drives differ among the 7210 SAS platforms. It cannot be used with the internal
non-removable compact flash.
The no form of this command enables the drive.
Default
no shutdown
Parameters
cflash-id
Specifies the device identifier.
Values cf1:, cf2:, uf1: (7210 SAS-T, 7210 SAS-Sx 1/10GE: standalone and
standalone-VC, 7210 SAS-Sx 10/100GE, and 7210 SAS-Mxp)
cf2:, cf2-A:, cf2-B:, uf1:, uf1-A:, uf1-B: (7210 SAS-R6 and 7210 SAS-
R12)
cf1:, cf2: (7210 SAS-Sx 1/10GE: standalone and standalone-VC)
3.3.2.1.2 File commands
attrib
Syntax
attrib [+r | -r] file-url
attrib
Context
file
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command sets or resets the read-only attribute for a file in the local file system. To list all files and their
current attributes enter attrib or attrib x where x is either the filename or a wild-card (*).
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
104
SPACER TEXT
To Next Page
Loading...