Nokia 7210 SAS-Mxp - Page 105

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
File system management
When an attrib command is entered to list a specific file or all files in a directory, the file’s attributes are
displayed with or without an ‟R” preceding the filename. The ‟R” implies that the +r is set and that the file is
read-only. Files without the ‟R” designation implies that the -r is set and that the file is read-write-all.
Parameters
file-url
Specifies the URL for the local file.
+r Sets the read-only attribute on the specified file.
-r Clears/resets the read-only attribute on the specified file.
Values
file-url — local-url | remote-url
local-url — [cflash-id/ | usb-flash-id] [file-path]
remote-url — [{ftp:// | tftp://} login:pswd@remote-locn/] [file- path]
remote-locn — [hostname | ipv4-address | ipv6-address]
ipv4-address — a.b.c.d
ipv6-address — x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x — 0 to FFFF (hexadecimal)
d — 0 to 255 (decimal)
interface — a string up to 32, for link local addresses
cflash-id or usb-flash-id — cf1:, cf2:, uf1: (7210 SAS-T, 7210 SAS-Sx
1/10GE: standalone and standalone-VC,
7210 SAS-Sx 10/100GE, and 7210 SAS-Mxp)
cf2:, cf2-A:, cf2-B:, uf1:, uf1-A:, uf1-B:
(7210 SAS-R6 and 7210 SAS-R12)
cf1:, cf2: (7210 SAS-Sx 1/10GE: standalone
and standalone-VC)
+r
Keyword to set the read-only attribute on the specified file.
-r
Keyword to reset the read-only attribute on the specified file.
cd
Syntax
cd [file-url]
Context
file
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
105
SPACER TEXT