Nokia 7210 SAS-Mxp - Page 188

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
The system attempts to load all runtime image files configured in the primary-image first. If this fails, the
system attempts to load the runtime images from the location configured in the secondary-image. If the
secondary image load fails, the tertiary image specified in tertiary-image is used.
The no form of this command removes the primary-image configuration.
Parameters
file-url
Specifies the location-url can be either local (this flash) or a remote FTP server.
Values file-url [local-url | remote-url] (up to 180 characters) local-url
[<cflash-id/> | <usb-flash-id>][file-path] remote-url [{ftp://|tftp://}
login:pswd@remote-locn/][file-path] cflash-id cf1:, cf2 usb-flash-id uf1:
cf1:|cf2:|uf1: (7210 SAS-T, 7210 SAS-Sx 1/10GE, 7210 SAS-Sx
10/100GE, and 7210 SAS-Mxp)
cf2: | cf2-A: | cf2-B: | uf1: | uf1-A: | uf1-B: (7210 SAS-R6 and
7210 SAS-R12)
cf1: | cf2: (7210 SAS-S 1/10GE)
secondary-config
Syntax
secondary-config file-url
no secondary-config
Context
bof
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command configures the name and location of the secondary configuration file.
The system attempts to use the configuration as specified in secondary-config if the primary config
cannot be located. If the secondary-config file cannot be located, the system attempts to obtain the
configuration from the location specified in the tertiary-config.
If an error in the configuration file is encountered, the boot process aborts.
The no form of the command removes the secondary-config configuration.
Parameters
file-url
The secondary configuration file location, expressed as a file URL.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
188
SPACER TEXT