Nokia 7210 SAS-Mxp - Page 190

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
tertiary-config
Syntax
tertiary-config file-url
no tertiary-config
Context
bof
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command configures the name and location of the tertiary configuration file.
The system attempts to use the configuration specified in tertiary-config if both the primary and secondary
config files cannot be located. If this file cannot be located, the system boots with the factory default
configuration.
If an error in the configuration file is encountered, the boot process aborts.
The no form of the command removes the tertiary-config configuration.
Parameters
file-url
The tertiary configuration file location, expressed as a file URL.
Values local-url [<cflash-id/> | <usb-flash-id>][file-path] cflash-id cf1:, cf2 usb-
flash-id uf1: remote-url [{ftp://|tftp://} login:pswd@remote-locn/][file-
path]local-url
cf1: | cf2: | uf1: (7210 SAS-T, 7210 SAS-Sx 1/10GE, 7210 SAS-Sx
10/100GE, and 7210 SAS-Mxp)
cf2: | cf2-A: | cf2-B: | uf1: | uf1-A: | uf1-B: (7210 SAS-R6 and
7210 SAS-R12) cf1: | cf2: (7210 SAS-S 1/10GE)
tertiary-image
Syntax
tertiary-image file-url
no tertiary-image
Context
bof
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
190
SPACER TEXT