Nokia 7210 SAS-Mxp

To Next Page

To Previous Page

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM

CONFIGURATION GUIDE RELEASE 22.9.R1

Boot options

Platforms

Supported on all 7210 SAS platforms as described in this document, including those operating in access-

uplink mode

Description

This command configures the tertiary directory location for runtime image file loading.

The system attempts to load all runtime image files configured in the primary-image first. If this fails, the

system attempts to load the runtime images from the location configured in the secondary-image. If the

secondary image load fails, the tertiary image specified in tertiary-image is used.

The no form of this command removes the tertiary-image configuration.

Parameters

file-url

The location-url can be either local (this flash) or a remote FTP server.

Values file-url [local-url | remote-url] (up to 180 characters) local-url

[<cflash-id/> | <usb-flash-id>][file-path] remote-url [{ftp://|tftp://}

cf1: | cf2: | uf1: (7210 SAS-T, 7210 SAS-Sx 1/10GE, 7210 SAS-Sx

10/100GE, and 7210 SAS-Mxp)

cf2: | cf2-A: | cf2-B: | uf1: | uf1-A: | uf1-B: (7210 SAS-R6 and

7210 SAS-R12) cf1: | cf2: (7210 SAS-S 1/10GE)

uplink-mode

Syntax

uplink-mode {access-uplink| network}

Context

bof

Platforms

7210 SAS-T (network mode and access-uplink mode)

Description

This command configures the system in either access-uplink mode or network mode.

In access-uplink mode, the device allows for configuration of the port in access-uplink mode and allows

for use of access-uplink SAPs for service configuration. In this mode, the system boots up with all ports

configured in access mode. The user can modify the port mode to access-uplink after system boot up,

but the software does not allow the mode to be set to network. The software allows the user to configure

services to use only either access SAPs or access-uplink SAPs, but not MPLS-based SDPs. This mode is

supported on the 7210 SAS-T.

In network mode, the device allows for configuration of the port in network mode and allows the use of

network IP interfaces and MPLS-based SDPs for service configuration. In this mode, the system boots up

3HE 18197 AAAB TQZZA

Use subject to Terms available at: www.nokia.com/terms/.

191

SPACER TEXT

Nokia 7210 SAS-Mxp - Page 191