Nokia 7210 SAS-Mxp - Page 198

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
no uplinkA-port
Context
bof
Platforms
7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network mode and
access-uplink mode)
Description
This command configures the primary port to be used for boot up.
The no form of this command removes all the uplinkA parameters from the BOF.
Parameters
port-id
Specifies the primary port to be used for boot up in the slot/mda/port format.
uplinkB-port
Syntax
uplinkB-port port-id
no uplinkB-port
Context
bof
Platforms
7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network mode and
access-uplink mode)
Description
This command configures the secondary port to be used for boot up.
The no form of this command removes all the uplinkB parameters from the BOF.
Parameters
port-id
Specifies the secondary port to be used for boot up in the slot/mda/port format.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
198
SPACER TEXT