Nokia 7210 SAS-Mxp - Page 202

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
uplinkB-duplex full
uplinkB-speed 10000
uplinkB-address 0
uplinkB-vlan 0
Default
uplinkB-speed 1000
Parameters
10
Keyword to set the link to 10 m/bps speed.
100
Keyword to set the link to 100 m/bps speed.
1000
Keyword to set the link to 1000 m/bps speed.
10000
Keyword to set the link to 10000 m/bps speed.
uplinkA-vlan
Syntax
uplinkA-vlan 0..4094
no uplinkA-vlan
Context
bof
Platforms
7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network mode and
access-uplink mode)
Description
This command configures a VLAN ID to be used on uplinkA.
The no form of this command is used to send untagged packets on uplinkA.
Parameters
0...4094
Specifies the VLAN ID.
Values 0 to 4049
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
202
SPACER TEXT