Nokia 7210 SAS-Mxp - Page 285

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Note:
The 1830 VWM allows for a mix of passive DWDM and active DWDM devices in a stacked
configuration; the configuration is supported on all 7210 SAS platforms.
6.6.3.1 1830 VWM LED functionality
Table 38: LED functionality for 7210 SAS and 1830 VWM (CWDM) and Table 39: LED functionality for
7210 SAS and 1830 VWM (DWDM) describe the LED functionality of the device.
Table 38: LED functionality for 7210 SAS and 1830 VWM (CWDM)
Events 7210 SAS
major alarm
LED
Optical shelf
controller LED
Optical shelf line
card LED
Shelf admin up and shelf
is physically connected to
7210 SAS
The shelf becomes
operational up by default
No color Green Amber/green based
on whether line card
provisioned correctly
or not
Shelf is operationally up No color Green Amber/green based
on whether card-type
provisioned correctly
or not
Line card admin up and
operational down when
card-type not provisioned
correctly (that is, mismatch
between provisioned and
equipped type)
Red Green Amber for that line
card LED
Line card admin up and
operational up when card-
type correctly provisioned
No color Green Green for that line
card LED
Line card removed Amber LED
glows
Green No LED glows (line
card is removed)
Line card inserted back No color Green LED turns to green
Table 39: LED functionality for 7210 SAS and 1830 VWM (DWDM)
Events 7210 SAS
major alarm
LED
Optical shelf
controller LED
Optical shelf line
card LED
Shelf admin up and shelf
is physically connected
to 7210 SAS. The shelf
No color Green Amber/green based
on whether line card
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
285
SPACER TEXT