Nokia 7210 SAS-Mxp - Page 307

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
no shutdown
exit
----------------------------------------------
A:sim1>config>system>cron#
6.14.1.3.7 Time range
ACLs and QoS policy configurations may be enhanced to support time-based matching. CRON
configuration includes time matching with the schedule subcommand. Schedules are based on events;
time-range defines an end-time that is used as a match criteria.
Time range elements include Create, Absolute, Daily, Weekdays, Weekend, and Weekly.
6.14.1.3.7.1 Create
This command can be used to enable the time-range context.
Use the following syntax to create a time-range.
config>system>cron
time-range name create
Example: Command usage to create a time-range called "test1"
config>system>cron# time-range test1 create
config>system>cron>time-range$
6.14.1.3.7.2 Absolute
The absolute command configures a start and end time that will not repeat.
Use the following syntax to configure a non-repetitive time range.
config>system>cron>time-range$
absolute absolute-time end absolute-time
Example: Command usage to configure a non-repetitive time range
config>system>cron>time-range$ absolute start 2006/05/05,11:00 end
2006/05/06,11:01
config>system>cron>time-range$
Example
The following is a sample configuration output of an absolute time range beginning on May 5, 2006 at
11:00 and ending May 6, 2006 at 11:01.
A:sim1>config>system>cron>time-range# show cron time-range detail
===============================================================================
Cron time-range details
===============================================================================
Name : test1
Triggers : 0
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
307
SPACER TEXT