Nokia 7210 SAS-Mxp - Page 352

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Values file url — local-url | remote-url: 255 chars max
local-url — [cflash-id/ | usb-flash-id][file-path]
remote-url — [{ftp://} login:pswd@remote-locn/][file-path]
remote-locn — [hostname | ipv4-address]
ipv4-address— a.b.c.d
uf1: (7210 SAS-T, 7210 SAS-Mxp,
7210 SAS-Sx 1/10GE: standalone and
standalone-VC, and 7210 SAS-Sx 10/
100GE)
usb-flash-id
—
uf1:, uf1-A:, uf1-B: (7210 SAS-R6 and
7210 SAS-R12)
cf1:, cf2: (7210 SAS-T, 7210 SAS-Mxp,
7210 SAS-Sx 10/100GE, and 7210 SAS-Sx
1/10GE: standalone and standalone-VC)
cflash-id —
cf2:, cf2-A:, cf2-B: (7210 SAS-R6 and
7210 SAS-R12)
boot-good-exec
Syntax
boot-good-exec file-url
no boot-good-exec
Context
config>system
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
Use this command to configure a URL for a CLI script to exec following the success of a boot-up
configuration.
See the exec command for related commands. This command executes the contents of a text file as if they
were commands entered at the console.
Default
no boot-good-exec
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
352
SPACER TEXT