7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Parameters
count
Specifies the maximum number of backup revisions.
Values 1 to 9
contact
Syntax
contact contact-name
no contact
Context
config>system
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command creates a text string that identifies the contact name for the device.
Only one contact can be configured, if multiple contacts are configured the last one entered will overwrite
the previous entry.
The no form of this command reverts to the default.
Parameters
contact-name
Specifies the contact name character string. The string may be up to 80 characters. Any
printable, seven-bit ASCII characters can be used within the string. If the string contains
special characters (#, $, spaces, and so on), the entire string must be enclosed within
double quotes.
coordinates
Syntax
coordinates coordinates
no coordinates
Context
config>system
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
356
SPACER TEXT
To Next Page
Loading...