Nokia 7210 SAS-Mxp - Page 397

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Parameters
sdh
Specifies the values used on a G.781 Option 1 compliant network.
sonet
Specifies the values used on a G.781 Option 2 compliant network.
peer
Syntax
peer ip-address [create]
no peer ip-address
Context
config>system>ptp
Platforms
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx 1/10GE (standalone), 7210 SAS-T (network
and access-uplink)
Description
Commands in this context configure parameters associated with remote PTP peers.
Note:
The maximum supported number of PTP peers depends on the supported PTP PPS rate on
7210 SAS platforms. Contact a Nokia representative for more information.
If the clock-type is ordinary slave or boundary, and PTP is not shut down, the last peer cannot be
deleted. This prevents the user from having PTP enabled without any peer configured and enabled.
The no form of this command deletes the specified peer.
Parameters
ip-address
Specifies the IPv4 address of the remote peer.
Values a.b.c.d
create
Keyword to create the peer.
shutdown
Syntax
[no] shutdown
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
397
SPACER TEXT