7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Parameters
date
Specifies the local date and time accurate to the minute in the YYYY/MM/DD format.
Values YYYY is the four-digit year
MM is the two-digit month
DD is the two-digit date
time
Specifies the time (accurate to the second) in the hh:mm[:ss] format. If no seconds value is
entered, the seconds are set to 00.
Values hh is the two-digit hour in 24 hour format (00=midnight, 12=noon)
mm is the two-digit minute
Default 0
time
Syntax
time
Context
config>system
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
Commands in this context configure the system time zone and time synchronization parameters.
6.20.2.1.7 Network Time Protocol commands
ntp
Syntax
[no] ntp
Context
config>system>time
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
404
SPACER TEXT
To Next Page
Loading...